I thing maximum computer users know about the cmd and cmd prompt. In my previous posts I have discussed a lot about commands, but I am here again with a trick which can give a cool look to the cmd prompt, because Many of you may feel bored with the same black and white screen when working with command prompt,.
So Here are the steps,.
Step 1:- Open CMD Threw Start program. Step 2:- Write "Color" (Without Quotation). Step 3:- With Color You Have To Write Any Number Like "Color 1" ,"Color 2","Color 3" E.T.C. See Numbers With Colors Below 0 - black 1 - blue 2 - green 3 - aqua 4 - red 5 - purple 6 - yellow 7 - white 8 - gray 9 - light blue a - light green b - light aqua c - light red d - light purple e - light yellow f - bright white Step 4:- After Write "Color 2" Press Enter. as shown in the figure,. and you are done,
Now one more trick i want to share with you. All Website Has Their Own IP Address. We Can Open Any Website Threw Their IP Address.Hackers Used This Command For Hacking Website. If you want to find Out the IP address of an website then,..
Step 1:- Open CMD Threw Start program. Step 2:- Write "ping" And After Any Website URL. EX."ping Google.com" Step 3:- Then Press Enter.As you can see in the above picture.
Thanks for visiting, subscribe this blog for the latest updates in your inbox, and don't forget to like and share this with friends,.
Few weeks ago, the Internet was abuzz with cinemagraphs, an artistic and more sophisticated form of animated GIFs that fit somewhere between a still image and a moving video.
Cinemagraphs are like animated GIFs as far as the image format is concerned but a big difference is that, in a Cinemagraph, only a portion of a photograph is moving in an infinite loop while everything else is frozen. For instance, in the image embedded above, only the girl’s hair is moving slightly with the wind and the frames repeat after every few seconds.
How to Create Cinemagraphs?
Creating animated GIFs is super easy and Cinemagraphs too, as you’ll soon learn, aren’t that complicated to recreate provided you have the right tools.
In the following video tutorial, Photoshop guru Russell Preston Brown shares a neat technique that will help you turn a video clip into an animated cinemagraph image using the extended version of Adobe Photoshop CS5. You can grab a 30-day trial of Photoshop here.
You can also download a higher resolution version of his video tutorial directly from adobe.com.
The I’m Feeling Lucky button on the Google homepage, which has been sitting there since day one, takes you directly to the first search result completely bypassing Google’s search results pages. It’s a convenient option for consumers though it does cost Google a lot of money since the company miss an opportunity to serve you ads.
Google won’t mind you spending a little more time on their own properties and thus, after nearly 15 years, they have made one little change to the “I’m Feeling Lucky” button.
Google wants you to spend more time on their own properties.
If you hover your mouse over the Feeling Lucky button for a second or two, it now shows a rotating list of Google’s other products like Hot Trends, The Arts Project, Image Search, Google Doodles, Google Earth and Local Search (see snippet below).
The interesting part is that these suggestions show up even if you have entered a search query in the Google search box. Thus, if you don’t click as soon as your cursor is over the Feeling Lucky button, you might land up on another Google property itself. It is not the most user-friendly approach though as consumers have no idea where that click will lead them to.
The change is now live on the main google.com website but not on the country-specific Google sites. And here’s the snippet of code that generates the list of suggestions.
(If you have any trick, Feel free to comment below and let the others know)
Sunday, 12 August 2012
Windows XP Professional SP3 32bit - Black Edition 2012.4.12, is windows xp SP3 with 2012 update. This is really new windows XP Black Edition that release in this year, in this windows XP SP3 it have been Removed DriverPack Monitors (Color p
rofiles are not applied in DirectX or OpenGL Games and Applications,in Windows XP Professional SP3 32bit - Black Edition 2012.4.12, It is better to do the color calibrate for a Monitor in the Monitor OSD menu.) Added driverPack CPU v10.05. Updated Flash Player ActiveX Control form "v11.1.102.63" to "v11.2.202.228". Updated Microsoft Runtime Visual C-family v8. Updated Windows XP Root Certificates Update (KB931125) from "Version February 2012" to "Version March 2012". Updated Tweak "Suppressing Microsoft Update nagging to install Windows Malicious Software Removal Tool (KB890830)" from "v4.6.6000" to "v4.7.6100". Integrated all Windows XP Service Pack 3 Updates form 15.3.2012 till 10.4.2012.
Windwos Feature :
This is the original Windows XP Professional SP3 32-bit (Volume License) ISO from Microsoft.
Installation process is Unattended with Prompt repair option.
This Windows XP is updatable a Valid WGA CD-Key is already inserted and a WGA crack will be also installed and a Windows XP Activation is not required.
Includes all official and some unofficial Windows XP Service Pack 3 Updates till 10.4.2012.
Over 200 MB integrated drivers for SATA/ACHI, LAN, WLAN and Monitors.
A lot of Windows XP settings have been already set and are also set for new created Windows XP accounts.
Includes a Codec Pack that will decode and encode almost every Audio and Video file format.
Booting and Running a little bit faster because some worthless Windows XP files and Programs are removed and all the Windows XP Updates are slipstreamed.
After the Windows XP installation you can choose if you want the Preconfigured Settings and the Extra Programs to be implemented, When nothing has been selected after 60 seconds then the option Yes will be automatically selected.
Integrated in this windows :
(o) Extras:
7 new
Windows XP Themes added: (ChaNinja Style RC5 v1.0), (Luna Element Black v5.1 + CSS), (Windows 7 Colors v1.0), (Disney - It's a Magical World v1.0), (BlackMesa v1.1), (NeoGeniX LS v1.0), (Royale Remixed v1.47).
A couple of new Web Links added to the Windows XP Favorites folder.
Key Changer (Keyfinder v1.51) to change the Windows XP CD-Key.
Text file with working WGA Keys that passes the Windows XP validation check.
(o) Patches:
MF4SBF Patch v2.0: Fixes the Windows XP slow boot bug which is caused by the "Microsoft .NET Framework NGEN v4.0.30319" Service.
TCP/IP Patch: Allows you to have 16777214 (Max) Half-Open TCP Connections instead of 10.
Uxtheme Patch: Allows you to use un-signed Custom visual styles.
SFC Patch: Allows you to disable and enable Windows File Protection with a registry key.
RAID-5 Patch: This will enable Software RAID-5 Support.
(o) Tweaks:
Suppressing Microsoft Update nagging to install Windows Genuine Advantage Notifications v1.9.40.0 (KB905474).
Suppressing Microsoft Update nagging to install Windows Malicious Software Removal Tool v4.7.6100 (KB890830).
(o) Driver Packs:
MassStorage v12.03
LAN v12.02
WLAN v12.02
CPU v10.05
(o) Windows XP Service Pack 3 Updates:
Windows XP Service Pack 3 (KB936929).
Windows Internet Explorer 8.
Windows Media Player 11.
Microsoft European Union Expansion Font Update v1.2.
Microsoft XML Core Services v4.0 Service Pack 3 (KB973685).
Windows XP Root Certificates Update (KB931125) Version March 2012.
Windows XP CAPICOM v2102.
Microsoft Windows Update Web Control 7.4.7600.243.
Microsoft Update Catalog Web Control 7.4.7057.248.
(o) New Microsoft Windows XP Service Pack 3 Applications:
Windows XP Powertoy - ClearType Tuner v1.01.
Windows XP Powertoy - Alt-Tab Replacement v1.0.
Windows User Profile Hive Cleanup Service v1.6g.
Microsoft BitLocker To Go Reader v1.0 (KB970401).
Windows Feature Pack for Storage v1.0 (KB952013).
Windows XP exFAT file system driver update package v1.0 (KB955704).
Windows XP GDI+ Detection Tool v1 (KB873374).
Windows XP QFEcheck v6.2.29.0.
Microsoft Windows Browser Choice (KB976002 v5).
Windows Genuine Advantage Validation v1.9.42.0 (KB892130) - Cracked Version.
(o) Runtimes:
Java SE Runtime Environment (JRE) v7 Update 3.
Flash Player ActiveX Control v11.2.202.228.
Microsoft Silverlight v5.0.61118.0.
Microsoft DirectX v9.29.1962.
Microsoft Visual C-family (Up-to-Date) v1, v2, v3, v4, v5, v6, v7, v8, v9, v10.
Microsoft Visual Basic (Up-to-Date) v1, v2, v3, v4, v5, v6, v7+.
[#] REMOVED WINDOWS XP COMPONENTS.
------------------------------------------------------------------
Applications: Address Book
Multimedia: Images and Backgrounds, Movie Maker, Music Samples, Old CDPlayer and Sound Recorder.
Network: Communication tools, MSN Explorer, Netmeeting, Outlook Express, Windows Messenger.
Operating System Options: Blaster/Nachi removal tool, Desktop Cleanup Wizard, Out of Box Experience (OOBE), Tour, Zip Folders.
Drivers: Display Adapters, IBM ThinkPad, Logitech WingMan, Microsoft SideWinder, Scanners, Serial Pen Tablet, Sony Jog Dial, Toshiba DVD decoder card.
Files: clock.avi, swtchbrd.bmp, yahoo.bmp.
Folders: "DOCS", "DOTNETFX", "SUPPORT", "VALUEADD", "I386WIN9XMIG", "I386WIN9XUPG".
Nothing has been removed that could cause any System Problems or any Problems with other Software Applications.
6) devmgmt.msc - Device manager
7) diskmgmt.msc - Disk management
8) dfrg.msc - Disk defrag
9) eventvwr.msc - Event viewer
10) fsmgmt.msc - Shared folders
11) gpedit.msc - Group policies
12) lusrmgr.msc - Local users and groups
13) perfmon.msc - Performance monitor
14) rsop.msc - Resultant set of policies
15) secpol.msc - Local security settings16) services.msc - Various Services
17) msinfo32 - System Information
18) sysedit - System Edit
19) win.ini - windows loading information(also system.ini)
20) winver _ Shows current version of windows
21) calc - calculator
How to Enable God Mode in Windows 7 Windows 7 is the smarter and faster operating system developed by Microsoft. There are many setting options available in the Control Panel of Windows 7, but sometimes it is difficult to find the perfect s
etting option. If you have to change a lot of settings in your Windows 7, then it will take a lot of time in Control Panel, so here I am
sharing a trick in which you can do all the settings of Windows 7 like you do in the Control Panel directly from a single window. The trick is very easy, you just have to create a folder and that folder will work as Settings pane. People call this trick as Windows 7 God Mode.
Steps to Create a Folder:
1.Create a new folder and name it anything.
2.Now, rename the folder by pressing F2 or Right-click>>Rename and give it this new
name: Settings.{ED7BA470-8E54-465E-825C-99712043E01C}
3.After renaming the folder, its icon will be changed. Double click the folder to open it.
Now, you will see a screen like below. Here, you can change all the settings of your Windows 7 OS.
Here is a complete guide to get a Dual boot setup with Windows Vista, 7 and Leopard running side by side. Please note this is a complete tutorial and if followed exactly you should be running Leopard and Vista side by side without any problems.
Well before we proceed with the guide, here is the stuff that you will need for a successful dual boot setup.
Vista or 7 (Ultimate) Already installed on your Primary Hard Disk.
iATKOS v1.0 DVD. (Do not ask me where you can download this)
Windows Vista, 7 Boot DVD (Just incase something goes wrong)
Well now that you have everything ready, lets get started then. Please note this is going to take sometime, here we go……….
Install Vista or 7(Ultimate) on the First Partition of your Hard Disk. I am not going to elaborate into How to install Windows, I hope everyone knows it. If you already have it installed then read on..
Right click on My Computer and Click on Manage. Select Disk Management. Now Create a new Volume for OSX by shrinking an existing volume. You need atleast 5GB of space and the new volume should show up as Unallocated.
Make sure that the partition shows up as Unallocated, else repeat the previous step.
Now restart the machine and boot into the Leopard DVD that you burned using the iATKOS v1.0 DVD Image.
Press F8 as the countdown begins and type -v at the prompt and hit enter.
You should see scrolling text on the screen now. If it stops anywhere then drop a comment and I’ll try to help you out.
After a while you should be looking at the Leopard Installer. Follow the instructions on Screen.
Once the Loading Bar vanishes Select Utilities -> Disk Utility .
Select the Volume you created previously and format it as MAC OSX Journaled Extended. Once the formatting is done the volume is ready for installation.
Now Close Disk Utility and Select Utilities -> Darwin Boot. Type Y at the prompt.
At the prompt when it asks for the Disk Number enter 0. For the Partition Number if your Leopard Partition is 2nd on the disk, then enter 2 and so on.
Accept the following prompts and you should see a success prompt saying that so many block of data were written successfully.
Now get back to the Leopard Install Screen. Choose the partition that you made in the beginning and follow the instructions on screen.
Please don’t select any patches etc during the installation, this is normally the reason for most failed installations. Just the plain install would do.
Once the Install is done, reboot with the DVD in the drive. Press F8 at Darwin Boot Loader and type-s and press enter.
Execute the following commands :
fdisk -e /dev/rdisk0 flag 1 quit reboot
Now before the PC restarts remove the DVD. At this point you should be able to boot into Vista normally.
Note: If you are unable to log into windows, because there is an error which says ‘winload.exe’ correupted.! Relax. Just insert the Windows VISTA boot DVD into the drive and restart. Click on ‘Repair computer’ once you are inside the DVD and it will automatically detect if a problem exists and suggest ‘Repair and Restart’. Press the same, and remove the DVD once the PC is about to restart. You should now be able to log in to vista without any problem.
Now that we have almost everything running fine, lets proceed with the dual boot setup.
Boot into Vista. Copy the chain0 file from the Leopard DVD to C:
Open the ‘Command prompt’ with ‘Elevated Admin’ privileges from the Start Menu.
Type the following into the prompt
bcdedit /copy {current} /d ‘Mac OS X’ bcdedit /enum active bcdedit /set {GUID} PATH \chain0
In the first command type {current} as it is, literally..nothing else..just {current} with the brackets. In the 3rd command however, replace the {GUID} with the alphanumeric GUID you see in the enumerated list under MAC OS X. You can see this list on your terminal as soon as you type the 2nd command above.
Close the Command Prompt and Restart Vista.
You Should now be looking at a screen with two options to boot into Mac OSX or Vista.
Select Mac OSX to see if you can boot into it. You should see the familiar Darwin boot Loading screen with the timer going down. If you dont do anything, then it counts to zero and again shows the menu screen with Vista and MAC OSX options. Dont panic!
Again select MAC OS X, and now as the timer counts down, Press F8. You would see a list of partitions on your disk with their names. Select the partition with MAC OSX installed by using up/down arrows and press ENTER.
Voila!! your Mac should be booting up as you read this..
See it was that simple. No more HFS+ and Blinking Cursor errors. Just follow this guide step by step and you should be able to dual boot Windows Vista and Leopard in no time. If you have any questions just drop in a comment, I’ll reply at the earliest.
For Drivers and Patches I suggest you look at the InsanelyMac Forums. This guide would have been nearly impossible without :
The release of movies like Avengers, Spiderman and Batman is a real testament to the popularity of comic books. Technology has changed and taken over a lot of things, but comics remain as popular as ever. People might have started reading them online, or on their smartphones, but comic strips still have a huge fan-following all over the world. It is natural to get ideas of your own if you are into comics, but most people never get down to creating these caricatures due to the lack of drawing prowess.PhotoComic is an iOS app that solves this problem, and using it, you will be able to create your very own comic strips. The app just needs you to provide it with a few photos, and all other tools are available within the app. The end result will leave you with a quite authentic-looking comic. The app is also perfect for captioning your photos and sharing them with your friends.
Using PhotoComic is so easy that you just have to launch the app and everything else will follow suit effortlessly. The first step towards creating your own comic is to choose the page layout. To do that, hit the 3rd button in the bottom bar. The layout menu has got a preview thumbnail for each selection, and there are several options for number of photos on each page and their arrangement. So, once the layout has been selected, you can start adding photos to each section of the page. To do that, hit the blue ‘+’ button located at the center of each box. PhotoComic allows its users to load photos from the camera roll of their iPhone, or you can simply snap a photo using the Camera option and use it in your comic. Photos can be adjusted in size and placement by simply pinching and dragging them around within the picture box.
Once you are satisfied with the photos, it’s time to add text bubbles and action words to them. To add speech and thought bubbles, hit the second button in the bottom bar. There are three kind of bubbles available within the app, and you can edit the text by double-tapping the bubble after it has been placed on the pictures. Thanks to the text editing menu in PhotoComic, you can change the font of text (Laffayette Comic Pro, Helvetica and Ariel are available). The text menu also has the option to change the size and color of the text. The lifeblood of any comic, the action words, claim a separate menu in PhotoComic, and you can change their size and orientation (via dragging and pinching) after they have been placed on the picture.
PhotoComic lets you share your comics over Facebook, Twitter and through email, and you can grab this iPhone app for free by heading to the link below.
When we talk about editing, resizing, manipulating of pictures/images most of the people use adobe photoshop program and few other softwares.
But now we have so many other softwares in the market that are free for download and they allow us to edit and manipulate pictures of any type.
Purchase of photo editing softwares is not easy for every one so, we came here with 20 best and useful softwares which allow us to edit photos without spending a penny.
I hope every body will be satisfied with this list even designers as image/picture editing is thier most common job.
I have already posted the keygen for all adobe CS6 products but I think it’s safe to say that not everyone will willing to get a copy if all one need to do is just basic image editing stuff. That’s probably one of the main reason why there’s still a fairly large crowd out there actively looking for free alternatives to Photoshop to help them in their daily basic design jobs. If you are not going into advance image editing, you should know that there’s always free software out there capable to perform what Photoshop can.
There’s also free web services that allows you to perform basic image editing online. Here’s few examples I’ve previously mentioned in this blog:
If you are not convinced by the stability of online services and looking for something that installs on your machine and are able to work even if you are without Internet connection, here’s some free alternatives to Adobe Photoshop, software versions. Full content after jump.
1.Gimp
Gimp works across several different platform (Linux, Mac, Windows, FreeBSD, Sun OpenSolaris) and is perhaps one of the best free alternatives out there so far. Gimp has a large user community, with great list of tutorials on the official sites.
[Windows only] This free photo editor originates from Japan, with English versions to download. Supports layers, masks, and some basic tools of Photoshop.
[Mac only] Seashore is an open source image editor for Mac OS X’s Cocoa framework. It features gradients, textures and anti-aliasing for both text and brush strokes. It supports multiple layers and alpha channel editing. It is based around the GIMP’s technology and uses the same native file format.
Inkscape is an open-source vector graphics editor similar to Adobe Illustrator, Corel Draw, Freehand, or Xara X. What sets Inkscape apart is its use of Scalable Vector Graphics (SVG), an open XML-based W3C standard, as the native format.
Xara Xtreme for Linux is a powerful, general purpose graphics program for Unix platforms including Linux, FreeBSD and (in development) OS-X. Formely known as Xara LX, it is based onXara Xtreme for Windows, which is the fastest graphics program available, period.
[Windows only] PhotoPlus is the amazing photo editing software that enables you to fix and enhance digital photos, create stunning bitmap graphics and even web animations.
[Mac only] You may think this is just any normal image preview tool, but the fact is Mac’s Preview can perform more. Folks at Usingmac describe how you can use Mac’s Preview tool to perform basic image editing.
12.PhotoFiltre
[Windows only] It allows you to do simple or advanced adjustments to an image and apply a vast range of filters on it. It is simple and intuitive to use, and has an easy learning curve.
