ilinks

ilinks

About

Saturday, 11 August 2012

Windows 7 enable God mode



How to Enable God Mode in Windows 7
Windows 7 is the smarter and faster operating system developed by Microsoft. There are many setting options available in the Control Panel of Windows 7, but sometimes it is difficult to find the perfect s
etting option. If you have to change a lot of settings in your Windows 7, then it will take a lot of time in Control Panel, so here I am   sharing a trick in which you can do all the settings of Windows 7 like you do in the Control Panel directly from a single window. The trick is very easy, you just have to create a folder and that folder will work as Settings pane. People call this trick as Windows 7 God Mode.

Steps to Create a Folder:

1.Create a new folder and name it anything.

2.Now, rename the folder by pressing F2 or Right-click>>Rename and give it this new
name: Settings.{ED7BA470-8E54-465E-825C-99712043E01C}

3.After renaming the folder, its icon will be changed. Double click the folder to open it.


Now, you will see a screen like below. Here, you can change all the settings of your Windows 7 OS.

Sunday, 5 August 2012

Dual Boot Leopard and Windows Vista


Here is a complete guide to get a Dual boot setup with Windows Vista, 7 and Leopard running side by side. Please note this is a complete tutorial and if followed exactly you should be running Leopard and Vista side by side without any problems.
osxleopard
Well before we proceed with the guide, here is the stuff that you will need for a successful dual boot setup.
  • Vista or 7 (Ultimate) Already installed on your Primary Hard Disk.
  • iATKOS v1.0 DVD. (Do not ask me where you can download this)
  • Windows Vista, 7 Boot DVD (Just incase something goes wrong)
Well now that you have everything ready, lets get started then. Please note this is going to take sometime, here we go……….

  • Install Vista or 7(Ultimate) on the First Partition of your Hard Disk. I am not going to elaborate into How to install Windows, I hope everyone knows it. If you already have it installed then read on..
  • Right click on My Computer and Click on Manage. Select Disk Management. Now Create a new Volume for OSX by shrinking an existing volume. You need atleast 5GB of space and the new volume should show up as Unallocated.
  • Make sure that the partition shows up as Unallocated, else repeat the previous step.
  • Now restart the machine and boot into the Leopard DVD that you burned using the iATKOS v1.0 DVD Image.
  • Press F8 as the countdown begins and type -v at the prompt and hit enter.
  • You should see scrolling text on the screen now. If it stops anywhere then drop a comment and I’ll try to help you out.
  • After a while you should be looking at the Leopard Installer. Follow the instructions on Screen.
  • Once the Loading Bar vanishes Select Utilities -> Disk Utility .
  • Select the Volume you created previously and format it as MAC OSX Journaled Extended. Once the formatting is done the volume is ready for installation.
  • Now Close Disk Utility and Select Utilities -> Darwin Boot. Type Y at the prompt.
  • At the prompt when it asks for the Disk Number enter 0. For the Partition Number if your Leopard Partition is 2nd on the disk, then enter 2 and so on.
  • Accept the following prompts and you should see a success prompt saying that so many block of data were written successfully.
  • Now get back to the Leopard Install Screen. Choose the partition that you made in the beginning and follow the instructions on screen.
    Please don’t select any patches etc during the installation, this is normally the reason for most failed installations. Just the plain install would do.
  • Once the Install is done, reboot with the DVD in the drive. Press F8 at Darwin Boot Loader and type-s and press enter.
  • Execute the following commands :
    fdisk -e /dev/rdisk0
    flag 1
    quit
    reboot
  • Now before the PC restarts remove the DVD. At this point you should be able to boot into Vista normally.
    Note: If you are unable to log into windows, because there is an error which says ‘winload.exe’ correupted.! Relax. Just insert the Windows VISTA boot DVD into the drive and restart. Click on ‘Repair computer’ once you are inside the DVD and it will automatically detect if a problem exists and suggest ‘Repair and Restart’. Press the same, and remove the DVD once the PC is about to restart. You should now be able to log in to vista without any problem.
  • Now that we have almost everything running fine, lets proceed with the dual boot setup.
  • Boot into Vista. Copy the chain0 file from the Leopard DVD to C:
  • Open the ‘Command prompt’ with ‘Elevated Admin’ privileges from the Start Menu.
  • Type the following into the prompt
    bcdedit /copy {current} /d ‘Mac OS X’
    bcdedit /enum active
    bcdedit /set {GUID} PATH \chain0
    In the first command type {current} as it is, literally..nothing else..just {current} with the brackets. In the 3rd command however, replace the {GUID} with the alphanumeric GUID you see in the enumerated list under MAC OS X. You can see this list on your terminal as soon as you type the 2nd command above.
  • Close the Command Prompt and Restart Vista.
  • You Should now be looking at a screen with two options to boot into Mac OSX or Vista.
  • Select Mac OSX to see if you can boot into it. You should see the familiar Darwin boot Loading screen with the timer going down. If you dont do anything, then it counts to zero and again shows the menu screen with Vista and MAC OSX options. Dont panic!
    Again select MAC OS X, and now as the timer counts down, Press F8. You would see a list of partitions on your disk with their names. Select the partition with MAC OSX installed by using up/down arrows and press ENTER.
  • Voila!! your Mac should be booting up as you read this..
See it was that simple. No more HFS+ and Blinking Cursor errors. Just follow this guide step by step and you should be able to dual boot Windows Vista and Leopard in no time. If you have any questions just drop in a comment, I’ll reply at the earliest.
For Drivers and Patches I suggest you look at the InsanelyMac Forums. This guide would have been nearly impossible without :
  • Uphuck Forums
  • InsanelyMac Forums
  • OSX86 Wiki.

PhotoComic For iPhone Lets Anyone Create Comic Strips With Ease

The release of movies like Avengers, Spiderman and Batman is a real testament to the popularity of comic books. Technology has changed and taken over a lot of things, but comics remain as popular as ever. People might have started reading them online, or on their smartphones, but comic strips still have a huge fan-following all over the world. It is natural to get ideas of your own if you are into comics, but most people never get down to creating these caricatures due to the lack of drawing prowess.PhotoComic is an iOS app that solves this problem, and using it, you will be able to create your very own comic strips. The app just needs you to provide it with a few photos, and all other tools are available within the app. The end result will leave you with a quite authentic-looking comic. The app is also perfect for captioning your photos and sharing them with your friends.
PhotoComic Options PhotoComic Text Edit

Using PhotoComic is so easy that you just have to launch the app and everything else will follow suit effortlessly. The first step towards creating your own comic is to choose the page layout. To do that, hit the 3rd button in the bottom bar. The layout menu has got a preview thumbnail for each selection, and there are several options for number of photos on each page and their arrangement. So, once the layout has been selected, you can start adding photos to each section of the page. To do that, hit the blue ‘+’ button located at the center of each box. PhotoComic allows its users to load photos from the camera roll of their iPhone, or you can simply snap a photo using the Camera option and use it in your comic. Photos can be adjusted in size and placement by simply pinching and dragging them around within the picture box.
Once you are satisfied with the photos, it’s time to add text bubbles and action words to them. To add speech and thought bubbles, hit the second button in the bottom bar. There are three kind of bubbles available within the app, and you can edit the text by double-tapping the bubble after it has been placed on the pictures. Thanks to the text editing menu in PhotoComic, you can change the font of text (Laffayette Comic Pro, Helvetica and Ariel are available). The text menu also has the option to change the size and color of the text. The lifeblood of any comic, the action words, claim a separate menu in PhotoComic, and you can change their size and orientation (via dragging and pinching) after they have been placed on the picture.
PhotoComic lets you share your comics over Facebook, Twitter and through email, and you can grab this iPhone app for free by heading to the link below.

Friday, 3 August 2012

20 Best Photo Editing Software For Free Download

When we talk about editing, resizing, manipulating of pictures/images most of the people use adobe photoshop program and few other softwares.
But now we have so many other softwares in the market that are free for download and they allow us to edit and manipulate pictures of any type.
Purchase of photo editing softwares is not easy for every one so, we came here with 20 best and useful softwares which allow us to edit photos without spending a penny.
I hope every body will be satisfied with this list even designers as image/picture editing is thier most common job.

1) Paint.net

2) Photopos

3) PEdit

4) Irfan View

5) Stoik Imagic

6) Digikam

7) Visual Box

8 ) My Paint

9) Paint Star

[ad2]

10) Image Editing Tool

11) 5Dfly

12) Acorn

13) Seashore

14) Pinta

15) Kolourpaint

16) Krita

17) Gimp

18) Pixia

19) Pixen

20) Photoscape


21) Picasa