Thousands May Lose Net Access On July 9th July

Hackin Guru 

The warnings about the Internet problem have been splashed across Facebook and Google. Internet service providers have sent notices, and the FBI set up a special website.

--------------------------------------------------------------------------------------------------

CLICK HERE TO CHECK WHETHER YOU ARE INFECTED OR NOT

DNS RESOLUTION: RED (If infected)
DNS RESOLUTION: GREEN (if not infected)  }
CLICK HERE TO READ IN THE FBI'S REPORT
--------------------------------------------------------------------------------------------------
Thousands of Canadians could be among the hundreds of thousands of people around the world who might lose Internet access on July 9.That's the day the FBI will shut down all the "clean servers" it set up to combat a massive hacking operation...

Last November the FBI arrested and charged six Estonian men behind the malware as part of Operation Ghost Click. These hackers were able to make a fortune off their project, raking in millions for ads placed on their fraudulent websites.On the eve of the arrests, the FBI hired Paul Vixie, chairman of the Internet Systems Consortium (ISC) to install two temporary Internet servers that would prevent infected users from losing access to the Internet once the DNSChanger botnet was shut down.

DNS (Domain Name System) is a core Internet technology used to convert human readable domain names suchasfacebook.com into an IP address such as 10.181.211.1, which a computer understands.

It's estimated that there is still around 277,00 infections worldwide, despite a massive clean up operation. If you're concerned about your own PC, or family members, then there's a DNS checker website or more information over at the DNS Changer Working Group.

Running the temporary servers for eight months has cost the FBI $87,000. Both Facebook and Google created their own warning messages that showed up if someone using either site appeared to have an infected computer. Facebook users would get a message that says, "Your computer or network might be infected," along with a link that users can click for more information.Google users got a similar message, displayed at the top of a Google search results page. It also provides information on correcting the problem.

Ensure that the DNS Servers are not within the following range of Internet Protocols (IPs):

- 85.255.112.0 through 85.255.127.255

- 67.210.0.0 through 67.210.15.255

- 93.188.160.0 through 93.188.167.255

- 77.67.83.0 through 77.67.83.255

- 213.109.64.0 through 213.109.79.255

- 64.28.176.0 through 64.28.191.255

If DNSChanger is detected, users may use software from McAfee, Kaspersky Labs, Microsoft, Norton, or Trend Micro to clean the infection.

(Feel Free Comment below, if you have any issue about this post)

Reliance Latest Free GPRS Trick

Hi Friends, 

Reliance Free GPRS Trick

Its working 100% in Delhi , Haryana , Punjab And Rajasthan...




Create A New Setting:-

Name:-HRJTricks  or what u want

Homepage:- google.com

Apn:- rcomnet OR rcomwap OR rcommms

Proxy:- 216.155.153.105 OR wap9.info

Port:- 80


Note:- Try This Trick At 0 Balance.

Try With Any Ucweb.

Understanding Bandwidth

Bandwidth: Most hosting companies offer a variety of bandwidth options in their plans. So exactly what is bandwidth as it relates to web hosting? Put simply, bandwidth is the amount of traffic that is allowed to occur between your web site and the rest of the internet. The amount of bandwidth a hosting company can provide is determined by their network connections, both internal to their data center and external to the public internet.

Network Connectivity:The internet, in the most simplest of terms, is a group of millions of computers connected by networks. These connections within the internet can be large or small depending upon the cabling and equipment that is used at a particular internet location. It is the size of each network connection that determines how much bandwidth is available. For example, if you use a DSL connection to connect to the internet, you have 1.54 Mega bits (Mb) of bandwidth. Bandwidth therefore is measured in bits (a single 0 or 1). Bits are grouped in bytes which form words, text, and other information that is transferred between your computer and the internet.

If you have a DSL connection to the internet, you have dedicated bandwidthbetween your computer and your internet provider. But your internet provider may have thousands of DSL connections to their location. All of these connection aggregate at your internet provider who then has their own dedicated connection to the internet (or multiple connections) which is much larger than your single connection. They must have enough bandwidth to serve your computing needs as well as all of their other customers. So while you have a 1.54Mb connection to your internet provider, your internet provider may have a 255Mb connection to the internet so it can accommodate your needs and up to 166 other users (255/1.54).


Traffic:A very simple analogy to use to understand bandwidth and traffic is to think of highways and cars. Bandwidth is the number of lanes on the highway and traffic is the number of cars on the highway. If you are the only car on a highway, you can travel very quickly. If you are stuck in the middle of rush hour, you may travel very slowly since all of the lanes are being used up.

Traffic is simply the number of bits that are transferred on network connections. It is easiest to understand traffic using examples. One Gigabyte is 2 to the 30th power (1,073,741,824) bytes. One gigabyte is equal to 1,024 megabytes. To put this in perspective, it takes one byte to store one character. Imagine 100 file cabinets in a building, each of these cabinets holds 1000 folders. Each folder has 100 papers. Each paper contains 100 characters - A GB is all the characters in the building. An MP3 song is about 4MB, the same song in wav format is about 40MB, a full length movie can be 800MB to 1000MB (1000MB = 1GB).

If you were to transfer this MP3 song from a web site to your computer, you would create 4MB of traffic between the web site you are downloading from and your computer. Depending upon the network connection between the web site and the internet, the transfer may occur very quickly, or it could take time if other people are also downloading files at the same time. If, for example, the web site you download from has a 10MB connection to the internet, and you are the only person accessing that web site to download your MP3, your 4MB file will be the only traffic on that web site. However, if three people are all downloading that same MP at the same time, 12MB (3 x 4MB) of traffic has been created. Because in this example, the host only has 10MB of bandwidth, someone will have to wait. The network equipment at the hosting company will cycle through each person downloading the file and transfer a small portion at a time so each person's file transfer can take place, but the transfer for everyone downloading the file will be slower. If 100 people all came to the site and downloaded the MP3 at the same time, the transfers would be extremely slow. If the host wanted to decrease the time it took to download files simultaneously, it could increase the bandwidth of their internet connection (at a cost due to upgrading equipment).


Hosting Bandwidth:In the example above, we discussed traffic in terms of downloading an MP3 file. However, each time you visit a web site, you are creating traffic, because in order to view that web page on your computer, the web page is first downloaded to your computer (between the web site and you) which is then displayed using your browser software (Internet Explorer, Netscape, etc.) . The page itself is simply a file that creates traffic just like the MP3 file in the example above (however, a web page is usually much smaller than a music file).

A web page may be very small or large depending upon the amount of text and the number and quality of images integrated within the web page. For example, the home page for CNN.com is about 200KB (200 Kilobytes = 200,000 bytes = 1,600,000 bits). This is typically large for a web page. In comparison, Yahoo's home page is about 70KB.

Hack any WiFi network Easily

                                 
Doesn’t it suck when you see your laptop’s catching so many wi-fi signals but none of them is accessible.. don’t you feel like “I wish I could some how break the password and dive into the deep oceans of the information” I beleive everyone should be able to have free internet. If someday I make it big enough and I’ll be having ample money.. I promise I’ll provide free wifi hotspots all over the places.. “Let there be INTERNET”.. even If I don’t get rich.. I’ll become a politician and would make Internet a Fundemental right to every citizen.. Now that would be something..

That’s enough with the Castles in the air.. now lets get back to reality..

What I can do for you right now is that I can tell you how to hack a wifi network to access Internet.. Some would call it stealing.. some like me won’t..

I’ll call it Sharing.. Sharing is what on which the whole Internet is build upon…

So.. Here’s how we do it..

1) First we need to scan for available wireless networks.

Theres this great tool for windows to do this.. called “NetStumbler” or Kismet for Windows and Linux andKisMac for Mac

Below is a screenshot of NetStumbler.. It will show you a list of all the wireless access points in your range.

It’ll also show how the Wi-fi network is secured..

The two most common encryption types are:

1) WEP

2) WAP

WEP i.e Wire Equivalent Privacy is not consideres as safe as WAP i.e Wireless Application Protocol.

WEP have many flaws that allows a hacker to crack a WEP key easily.. whereas

WAP is currently the most secure and best option to secure a wi-fi network..

It can’t be easily cracked as WEP because the only way to retreive a WAP key is to use a brute-force attack or dictionary atack.

Here I’ll tell you how to Crack WEP

To crack WEP we will be using Live Linux distribution called BackTrack to crack WEP.

BackTrack have lots of preinstalled softwares for this very purpose..

The tools we will be using on Backtrack are:

Kismet – a wireless network detector

airodump – captures packets from a wireless router

aireplay – forges ARP requests

aircrack – decrypts the WEP keys

1) First of all we have to find a wireless access point along with its bssid, essid and channel number. To do this we will run kismet by opening up the terminal and typing in kismet. It may ask you for the appropriate adapter which in my case is ath0. You can see your device’s name by typing in the command iwconfig.

2) To be able to do some of the later things, your wireless adapter must be put into monitor mode. Kismetautomatically does this and as long as you keep it open, your wireless adapter will stay in monitor mode.

3) In kismet you will see the flags Y/N/0. Each one stands for a different type of encryption. In our case we will be looking for access points with the WEP encryption. Y=WEP N=OPEN 0=OTHER(usually WAP).

4) Once you find an access point, open a text document and paste in the networks broadcast name (essid), its mac address (bssid) and its channel number. To get the above information, use the arrow keys to select an access point and hit <ENTER> to get more information about it.

5) The next step is to start collecting data from the access point with airodump. Open up a new terminal and start airodump by typing in the command:

airodump-ng -c [channel#] -w [filename] –bssid [bssid] [device]

In the above command airodump-ng starts the program, the channel of your access point goes after -c , the file you wish to output the data goes after -w , and the MAC address of the access point goes after –bssid. The command ends with the device name. Make sure to leave out the brackets.

6) Leave the above running and open another terminal. Next we will generate some fake packets to the target access point so that the speed of the data output will increase. Put in the following command:

aireplay-ng -1 0 -a [bssid] -h 00:11:22:33:44:55:66 -e [essid] [device]

In the above command we are using the airplay-ng program. The -1 tells the program the specific attack we wish to use which in this case is fake authentication with the access point. The 0 cites the delay between attacks, -a is the MAC address of the target access point, -h is your wireless adapters MAC address, -e is the name (essid) of the target access point, and the command ends with the your wireless adapters device name.

7) Now, we will force the target access point to send out a huge amount of packets that we will be able to take advantage of by using them to attempt to crack the WEP key. Once the following command is executed, check yourairodump-ng terminal and you should see the ARP packet count to start to increase. The command is:

aireplay-ng -3 -b [bssid] -h 00:11:22:33:44:5:66 [device]

In this command, the -3 tells the program the specific type of attack which in this case is packet injection, -b is theMAC address of the target access point, -h is your wireless adapters MAC address, and the wireless adapter device name goes at the end.

 Once you have collected around 50k-500k packets, you may begin the attempt to break the WEP key. The command to begin the cracking process is:

aircrack-ng -a 1 -b [bssid] -n 128 [filename].ivs

In this command the -a 1 forces the program into the WEP attack mode, the -b is the targets MAC address, and the -n 128 tells the program the WEP key length. If you don’t know the -n , then leave it out. This should crack the WEP key within seconds. The more packets you capture, the bigger chance you have of cracking the WEP key.

I am sure it might have helped.:)

So keep reading and do subscribe to Learn Hacking

Feel Free to Post comments.

How to visit blocked site at your collage

In some collages and universities, some sites are blocked like Facebook, twitter, orkut, digg etc. Almost everybody wants to know how to unblock this kind of websites, so i am going to tell you a few strategies. OK Lets say you wanted to go on www.youtube.com but your stupid school blocks it, well here is how to bypass it.

1.Open up Command Prompt (Explained Above) Type Exactly this:

"Ping(Space)www.youtube.com " without the quotes of course

It should then say pinging youtube.com and will give you a number that should look abit like this. 208.65.153.251 

Ok now,

This number is your key, go to your web address bar type in

http://208.65.153.251

You will now be running youtube on the school / work computer through Youtubes 
IP Address.

2. Use a proxy server/unblock site such as www.instantunblock.com or www.ultimateunblock.com Or www.proxify.com, a good one is https://www.btunnel.com, i'm pretty sure no one has blocked it
That's just four there are many more:)

**if your school is constantly blocking the proxy you use, you could try going to http://peacefire.org/. On Peacefire you can set up your own proxy
OR join the mailing list which sends you a URL of a new proxy everytime one is made which is about 3-4 times a week.
Added by IGotDaHacks Although all credit goes to Bennett Haselton, Owner of Peacefire

3. Go to http://www.google.com.au and click on "Language Tools" 

Now in the space where you can translate webpages type the desired website

Click "German to English" then click translate, So basically the website is already in english so it cant be translated.

When you search for the Website at school on google, Below the link to the website should be a little link saying "Cached" Click that and you should be in.


Thanks , That's all on unblocking websites FOR THE MOMENT, We may have some more info later.


Does your school computer erase everything you installed after reboot? it's probably using the program deep freeze, to temporarily disable:

Download deep freeze unfreezer from http://www.unfreezer.cjb.net/

Increase your Internet speed by a different Trick

Now Here is a trick to speed up your Net connection, this trick works for all type of connections, like WiFi, dial up, LAN or any other,..
so here is the process,...
                                             

First connect the internet then. 

1: go to ur desktop

2: right click on "My computer"

3: den select "Manage"

4: den click "Device manager"

5: now u see a new window(Device manager window)

6: look down now u can see "Ports(COM & LPT)" ...click on it

7:den double click on "Communication Ports"


Note: some communication ports are: 
         device application interface()
           device diagnostic interface()
           device pipe()                      


    make changes for all available communication ports,..

8: after open u can see a "Communication Port properties"..

9: now go the "Port Setting"

10: and now change your "Bits per second" to "128000".

11: and "Flow control" change 2 "Hardware".

apply and see the result........     

Vodafone Free GPRS Trick

 

I have been receiving many emails asking about how to access free GPRS for Vodafonecustomers.

Vodafone has been slightly strict about there GPRS until this hack has been found out.In order to get Vodafone free gprs,you will have to try out this method I’ve mentioned below exactly.Thisvodafone hack has been tested on many mobiles and found out to be effective.[In fact this is not a hack for getting free GPRS in vodaphone,but a flaw which has been missed by them]

Settings For Vodafone Free GPRS [mobile]

Account Name : Vodafone_gprs 
Homepage : http://live.vodafone.in [or anything useful] 
User Name: (not required) 
Password :(not required)
Access Point Settings:[ to be configured in mobile,if not already given]
Proxy: Enabled 
Proxy Address: 10.10.1.100 
Proxy Port: 9401 
Data Bearer: Packet Data
Bearer Settings: [to be setup in mobile]
Packet Data Access Point: portalnmms 
Network type: IPV4 
Authentication: normal 
User Name :(not required) 
Password :(not required)

After configuring these settings in your Vodafone mobile,check for connection.If you are unable to access free internet[GPRS] on your vodafone mobile using this trick,then switch off your mobile,reinsert sim card and switch ON again.Now you can browse on your mobile for free.

Do this at your own risk, 

Hack any WiFi connection(realy works)

Here is the most wanted trick,.....
                                



  SO Here is a tool that can easly hack any WiFi connection, and working with it is much easyer,
  
you just need to,.......

1-- download  and then
2-- install it on your PC and
3-- choose Any available WiFi connection, 

   Download here

PASSWORD: www.yourhackinguru.blogspot.in

(IF YOU HAVE ANY ISSUE ABOUT THIS POST, COMMENT BELOW)

Free unlimited GPRS for Idea users,..

1. First of you are must be prepaid customer, for the prepaid customers you need to send SMS GPRS to 4666.
2. Then you need to send a message to receive the settings, for this send SMS GPRS (first three letters of your mobile phone company and model number). Eg SMS GPRS son K530i. Save thesettings you receive.
3.After that make some changes in your account as given here.. :-

Proxy Address – 218.242.245.230
Port – 808
User name — Blank
Password — Blank
Data Bearer — GPRS / Packet Data
Access Point Name — internet
Connection Name — Idea GPRS
Authentication – Normal
Homepage – www.google.com