Using NetBus Trojan to Control a Remote Computer.

Hey friends, today I m Talking about the NetBus Trojan which can be used to control a remote computer. This is not a Complete NetBus Trojan Horse Tutorial but i will try to give you sufficient information about it.
If you want some theory knowledge about the NetBus Trojan then you can visit the following link: 
NetBus Trojan Horse


Lets start, 
1. First you need the NetBus Trojan Files on your computer. You can download it from "thepiratebay.com"(recomended).Make sure your antivirus program is off because as the NetBus Trojan access the operating system commands the antivirus recognise it is a virus and deletes. 
2. Once you have downloaded the files you will have some files as shown in the following image.

3. You need to execute the Patch file on the Victims PC only once.(no need to do it repeatedly on different days the patch file once executed remains in the system till the user formats his PC)

4. Then start the NetBus file to start the NetBus Trojan program on your system.

5. Here you have to enter the ip address of the victim in place of localhost. If  you dont know the ip address of the victim you can use the Scan! button to find all the victims who are connected in LAN.
6. After entring the victims ip address click connect. You will get a notification in the status bar at the bottom as "Connected".
7. Now you can use the NetBus Trojan controls provided as you see in the above Image.

Try it. If you have any queries or suggesstions you can post comments here.
Enjoy...!!!